It depends on whether you have the Advanced or Base model. The Advanced (RZ09-0238) uses the RC30-0248 at 15.4V and about 80Wh, while the Base (RZ09-0270) uses the RC30-0270 at 15.4V and about 65Wh. These two packs are not interchangeable, so check the RZ09-XXXXX model number on the bottom of your laptop first. A quick way to tell them apart is per-key RGB and vapor chamber cooling on the Advanced versus single-zone RGB and an Ethernet port on the Base.

Flip the laptop over and read the full RZ09-XXXXX model number printed on the bottom panel. RZ09-0238 points to the Advanced model with the RC30-0248 (80Wh), and RZ09-0270 points to the Base model with the RC30-0270 (65Wh). You can also confirm by feature: per-key RGB lighting and a thinner chassis indicate the Advanced model, while a single-zone keyboard and an Ethernet port indicate the Base. Matching that model number is the surest way to order the correct 15.4V pack.

A replacement battery for this line runs $84.99. That price covers the lithium-ion packs used across the 2018 GTX 1060 models, including the RC30-0248 (80Wh) for the Advanced and the RC30-0270 (65Wh) for the Base. Both operate at 15.4V. Since the two sub-series take different part numbers, confirm your RZ09-XXXXX model number before purchasing so you order the pack that fits your exact configuration.

No. The Advanced and Base models use different, non-interchangeable batteries. The Advanced (RZ09-0238) takes the RC30-0248 at about 80Wh, while the Base (RZ09-0270) takes the RC30-0270 at about 65Wh, even though both share the 15.4V rating and the same 2018 GTX 1060 line. The internal chassis and cooling layouts differ (vapor chamber on the Advanced, heat pipe on the Base), so the packs are not cross-compatible. Always match the part number to your specific model.

Capacity and part number are the main differences. The Advanced model uses the RC30-0248 rated at about 80Wh, while the Base model uses the RC30-0270 rated at about 65Wh. Both run at 15.4V and use lithium-ion cells. The Advanced model carries vapor chamber cooling and per-key RGB in a thinner chassis, while the Base model uses heat pipe cooling, single-zone RGB, and adds an Ethernet port. These design differences mean each takes its own dedicated battery.

Look on the bottom of the laptop for the RZ09-XXXXX model number, then match it to the battery. RZ09-0238 corresponds to the RC30-0248 (80Wh) Advanced pack, and RZ09-0270 corresponds to the RC30-0270 (65Wh) Base pack. You can also open the bottom panel and read the part number printed directly on the battery itself. Confirming the RC30-0248 or RC30-0270 number is the most reliable way to order the right 15.4V replacement.

Yes, with basic tools. The battery sits inside the chassis, so you remove the bottom panel screws to reach it, disconnect the existing pack, and seat the matching replacement. Use the RC30-0248 (80Wh) for an Advanced model or the RC30-0270 (65Wh) for a Base model, and confirm your RZ09-XXXXX number before you start. Work slowly when unplugging the connector, and keep the panel screws organized so reassembly is straightforward.

Watch for runtime that drops sharply from what you expect, a charge that stalls below 100 percent, or a laptop that shuts off suddenly when unplugged. If your system reports the pack as failing or you see rapid drain at idle, the lithium-ion cells are likely worn. For this line that means moving to a fresh RC30-0248 (80Wh) on the Advanced or RC30-0270 (65Wh) on the Base, both 15.4V. Confirm your RZ09-XXXXX model number before ordering the matching replacement.